Sunday, January 1, 2017
Support Service tool V3400 for resetting Canon printers
Support Service tool V3400 for resetting Canon printers
Support Service tool V3400 for resetting Canon printers, and Support Driver Printers, allow you to reset the waste ink pad counter on some Canon printers:
You can solve the messages errors "Waste Ink Tank Full" or "Waste Ink Pad Full", "error 5B00" or "Error P07" on these printers:
- Canon Pixma iP2700, iP4800, iP4810, iP4840, iP4850, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880
- Canon Pixma MP230, MP240; MP250; MP260; MP270; MP280; MP480; MP490; MP540; MP550; MP560; MP620; MP630; MP640; MP980; MP990;
- Canon Pixma IX6500, IX6510, IX7000
- Canon Pixma IP3600, IP4940
- Canon Pixma PRO9000, PRO9500
- Canon Pixma MG2120. MG2140, MG2240, MG2250, MG2440, MG3240, MG3140, MG4100, MG4140, MG5140, MG5150, MG5240, MG5340, MG6140, MG6240, MG8140, MG8240
- Canon MX397, MX320, MX330, MX860
Where can you download the Service Tool V3400 ?
It is free here:
- ST V3400. (but check first for no virus or trojan)
There is too a paid version here:
- V3400 Canon Service Tool for all iPxxxx series, iX series, MGxxxx series, MP series printers maintenance and reset.
How using the Service Tool V3400 ?
- Dowload and install the Service Tool Canon V3400
- Enter in maintenance mode with the printer:
- Power off the printer
- Connect the printer to the central unit with an usb cable
- Hold on the "Resume" button (triangle in a circle) et press "Power"
- Hold on these two buttons until the led power lights.
- Release the "Resume" button, but not the power button, and press 5 times "Resume".
- Release the two buttons. Leds will flash, wait until it stops. Now you are in Maintenance Mode
- Run the Service Tool V3400
- Choose the right USB port in "USB PORT"
- In the section "Ink Absorber Counter", choose "Main"
- In the section "Counter Value" (%) choose the number the closest of the counter number and clik on "SET" (The counter number is in the section "EEPROM")
Troubleshooting:
- Error 002: a fonction is not supported by the printer
- Error 005: The printer is not compatible with this Service Tool
- Error 006: After you avec clicked on "Main", wait a few minutes. If the error still here, restarts the Service Tool
Support Service tool V3400 for resetting Canon printers
How to Service tool V3400
How to resetting Canon printers
how to resetting Canon
Available link for download
